HAYNES® HR-120® alloy (UNS N08120) alloy is a solid-solution-strengthened heat-resistant alloy that provides excellent strength at elevated temperature combined with very good resistance to carburizing and sulfidizing environments. Its oxidation resistance is comparable to other widely used Fe-Ni-Cr materials, such as alloys 330 and 800H, but its strength at temperatures up to 2000ºF (1095ºC) is significantly higher, even in comparison to Ni-Cr alloys. The alloy can be readily formed hot or cold, and is commonly welded using HAYNES® 556® filler wire.
Applications include those which require high strength combined with good resistance to carburizing and sulfidizing environments such as the following:
• Bar Frame Heat Treating Baskets • Radiant Tubes
• Wire Mesh Furnace Belts and Basket Liners • Cast Link Belt Pins
• Muffles, Retorts • Recuperators
• Heat Treating Fixtures • Fluidized Bed Components
• Waste Incinerators
HR-120® alloy heat treat furnace basket and mesh liner. This 3/8 inch diameter rod frame basket has replaced 1/2 inch diameter baskets in similar design in 330 and 600 alloys. This reduction in rod diameter is equivalent to a 43% weight reduction.
HAYNES® HR-120® alloy is furnished in the solution annealed condition, unless otherwise specified. Depending on the product form, the alloy is solution annealed at a temperature ranging from 2150 to 2250 °F (1175 to 1230 °C) and rapidly cooled. For more information on heat-treatment, please click here.