phone-icon800.354.0806
765.456.6012
The Home of HASTELLOY® and
HAYNES® Alloys

Specifications and Codes

Specifications

Codes

HAYNES® 230® alloy
(N06230)
Sheet, Plate & Strip AMS 5878
SB 435/B 435
P= 43
Billet, Rod & Bar AMS 5891
SB 572/B 572 B 472
P= 43
Coated Electrodes SFA 5.11/ A 5.11 (ENiCrWMo-1)
F= 43
Bare Welding Rods & Wire SFA 5.14/ A 5.14 (ERNiCrWMo-1)
AMS 5839
F= 43
Seamless Pipe & Tube SB 622/B 622
P= 43
Welded Pipe & Tube SB 619/B 619
SB 626/B 626
P= 43
Fittings SB 366/B 366
P= 43
Forgings AMS 5891
SB 564/B 564
P= 43
DIN 17744 No. 2.4733
NiCr22W14Mo
Others -
HAYNES® 230® alloy
(N06230)
ASME Section l 1650°F (899°C)1,4
Section lll Class 1 -
Class 2 -
Class 3 -
Section lV HF-300.2 500°F (132°C)1
Section Vlll Div. 1 1800°F (982°C)1,5,6
Div. 2 -
Section Xll 650°F (343°C)1
B16.5 1500°F (816°C)2
B16.34 1500°F (816°C)3,7
B31.1 -
B31.3 1650°F (900°C)1
MMPDS 6.3.9 
1Plate, Sheet, Bar, Forgings, fittings, welded pipe/tube, seamless pipe/tube
2Plate, Forgings
3Plate, Bar, Forgings, seamless pipe/tube
4This is the maximum design temperature for water service construction. Several ASME Code Cases govern additional usage:
     a) Per Section I Code Case 2665, 1300°F (704°C) is the maximum design temperature for molten nitrate salt wetted construction.
     b) Per Section I Code Case 2756, autogenous welds can be used in the design range of 1000°F and 1250°F (538-677°C).
     c) Weld strength reduction factors are governed by Section I PG-26 and Code Case 2805.    
5Section VIII Division 1 Code Case 2671 contains an external pressure chart for 1800°F (982°C).  
6For any bolts created from this material, 1650°F is the maximum design temperature. See Section VIII Division 1 Code Case 2775.
7B16 Case 5 allows for higher pressure-temperature ratings for valves made of this material.
Print Page Download Page
Back to top