phone-icon800.354.0806
765.456.6012
The Home of HASTELLOY® and
HAYNES® Alloys

Resistance to Seawater Crevice Corrosion

Seawater is probably the most common aqueous salt solution. Not only is it encountered in marine transportation and offshore oil rigs, but it is also used as a coolant in coastal facilities. Listed are data generated as part of a U.S. Navy study at the LaQue Laboratories in Wrightsville Beach, North Carolina (and published by D.M. Aylor et al, Paper No. 329, CORROSION 99, NACE International, 1999). Crevice tests were performed in both still (quiescent) and flowing seawater, at 29°C, plus or minus 3°C. Two samples (A & B) of each alloy were tested in still water for 180 days, and likewise in flowing water. Each sample contained two possible crevice sites. The results indicate that ULTIMET® alloy is even more resistant to crevice corrosion in seawater than C-276 alloy.

Alloy Quiescent Flowing
- No. of Sites Attacked Maximum Depth of Attack, mm No. of Sites Attacked Maximum Depth of Attack, mm
316L A:2, B:2 A:1.33, B:2.27 A:2, B:2 A:0.48, B:0.15
254SMO A:2, B:2 A:0.76, B:1.73 A:2, B:2 A:0.01, B:<0.01
625 A:2, B:2 A:0.18, B:0.04 A:2, B:2 A:<0.01, B:<0.01
C-276 A:1, B:1 A:0.10, B:0.13 A:0, B:0 A:0, B:0
C-22® A:0, B:0 A:0, B:0 A:0, B:0 A:0, B:0
ULTIMET® A:0, B:0 A:0, B:0 A:0, B:0 A:0, B:0
Print Page
Back to top