|
| ULTIMET alloy electrogalvanizing rolls have been used successfully in the production of galvanized steel for automobiles in the Far East and Europe. The corrosion/wear rate of ULTIMET alloy in this application is about half that of the previously used Ni-Cr-Mo alloy. |
|
|
 |
| The use of an ULTIMET weld overlay on the plug of a valve solved a problem of failure by erosion at a large chemical company in the U.S. The valve protected with ULTIMET has so far lasted three times as long as the unprotected valve, and is still in service. |
|
 |
| ULTIMET cast nozzles are now standard for a major incinerator scrubber manufacturer in Europe. In this application, ULTIMET alloy has out-performed ceramics and cast Co-Cr-W and Ni-Cr-Mo alloys. |
|
|
|
| ULTIMET is the standard shielding material for fans used by a large fiberglass company in North America. It has proved resistant to erosion/corrosion in fiberglass manufacturing, and is preferred over the Co-Cr-W alloys because of its relatively high ductility. |
|
