HAYNES^® HR-120^® alloy Information

33Fe^a-37Ni-25Cr-3Co-2.5Mo-2.5W-0.7Cb-0.7Mn-0.6Si-0.20N-0.1Al-0.05C-0.004B ^aAs Balance Maximum

A solid-solution-strengthened, heat-resistant alloy that provides excellent strength
at elevated temperature combined with very good resistance to carburizing and sulfidizing environments.

HAYNES^® HR-120^® alloy Site

Principal Features

Mechanical Properties

Thermal Stability

Environmental Resistance

Physical Properties

Welding

Machining and Grinding

Applications

Comparative Data

Availability

HAYNES^® HR-120^® alloy
Technical Briefs

HAYNES^® HR-120 ^® alloy
Wire Information

Metallurgist Support

Sales Office Addresses

Tubular Products

Fittings & Flanges

Availability (HAYNES^® HR-120^® alloy)

Sheet	Plate	Round Bar*
inch	inch	inch
0.125 (11 Gauge)	3/16	1/4
	1/4	3/8
	5/16	1/2
	3/8	5/8
	1/2	3/4
		1
*annealed and pickled

Weld Consumable	Alloy	Available Sizes, in.*
Cut Lengths	556TM	0.035, 0.045, 0.062, 0.094, 0.125
Layer-Wound Coils	556	0.035, 0.045, 0.062
Structural Wire	HR-120	0.045, 0.062, 0.080, 0.120, 0.135, 0.187
* Not all sizes shown are stocked (Other sizes can be produced as required by the customer.)

Trademarks

253 MA is a trademark of Avesta Jernverks Aktiebolag.
INCOLOY and 800 HT are trademarks of Inco Family of Companies.
RA 85H, RA 330, RA 333 are trademarks of Rolled Alloys, Inc.
HAYNES, HASTELLOY, 556, HR-120, HR-160, and MULTIMET are trademarks of Haynes International, Inc.

Haynes International, Inc. 800-354-0806 765-456-6012

HAYNES® HR-120® alloy Information

33Fea-37Ni-25Cr-3Co*-2.5Mo*-2.5W*-0.7Cb-0.7Mn-0.6Si-0.20N-0.1Al-0.05C-0.004B aAs Balance *Maximum

HAYNES^® HR-120^® alloy Information

33Fe^a-37Ni-25Cr-3Co-2.5Mo-2.5W-0.7Cb-0.7Mn-0.6Si-0.20N-0.1Al-0.05C-0.004B ^aAs Balance Maximum